White Custom Marble Sculpture Outdoor Religious Statue

Product Description

Guanyin Statue Marble religious statue custom a variety of marble sculptures

Description of Art Sculptures

Marble is easy to stain, clean should use less water, regularly with a slightly wet cloth with mild detergent wipe, and then dry and polish with a clean soft cloth, so that it restore luster. Or wipe with liquid lotion carefully, can be used lemon juice or vinegar clean stains, but lemon stay on the time is best not more than 2 minutes, if necessary can repeat the operation, and then clean and dry. For minor abrasions, special marble polishing powder and care agent can be used. For the old or valuable marble furniture should be handled by professional personnel.
This maintenance method uses a called, stone recrystallization system, this system has two parts, one part refers to the mechanical tools part, the other part refers to some special chemical materials; Chemical materials are also divided into two categories: one is the recrystallization system of granite, the other is the recrystallization system of marble. Its basic principle is that some special chemical materials under the mechanical action with the help of heat generated by friction, and the structure and organization of the stone surface combination and microrheological reaction, resulting in a new texture more hard and bright blend crystal layer, the use of these stone recrystallization system to granite and marble ground maintenance, Can make the stone floor bright & fresh & natural effect. For marble, it can also improve the abrasion resistance of the surface. To make its shine last longer. In general, granite ground for two years once such maintenance can be done. But because of the difference in texture of the marble floor, the general situation is about 2 months to do such maintenance, but the specific time depends on the degree of wear of the marble surface.
1. Marble is very fragile, afraid of the impact of hard objects, knock, so usually should pay attention to prevent iron and other heavy objects hit the stone surface, so as to avoid pits, affect the appearance of beauty. Hemp stone and granite are easier to clean and maintain, as long as you use some cleaning agents for simple surface cleaning, you can keep it forever.
2. Regularly wipe the table with a slightly wet cloth with mild detergent, and then dry and polish with a clean soft cloth. When the surface is stained, use some light caustic agent such as lemon juice or vinegar to clean the stain. Do not use soap or soda powder and other materials that are easy to damage the essence of the marble to wipe. The use of lemon juice should also be very careful, its stay time should not exceed 1 minute, if necessary, repeat the operation, and then clean and dry. For cosmetics, tea and tobacco stains, apply hydrogen peroxide, leave for two hours, then wash and dry. For oil stains, ethanol (alcohol), acetone (lignin) or lighter oil can be used to wipe, and then clean and dry. If marble furniture is burnt by cigarette butts, consider having it repaired.
3. For slightly bruised marble furniture, available special marble cleaner and care agent; The marble furniture with serious wear is difficult to deal with, can be wiped with steel velvet, and then polished with electric polishing machine, so that it can restore the original luster. For the old or valuable marble furniture should be handled by professional personnel.
4, oil painted marble furniture must be treated with lacquer peel agent, and in accordance with the product instructions. After removing all the paint, it is wiped with steel velvet and polished with an electric polisher.

Specification of Art Sculptures

1.High-quality materials

No Matter we use stainless steel plate or stainless steel tubes,We can see the thickness and the surface effect, all use the special exported standrard raw material, generally have 304 stainless steel and 316L stainless steel for your choose, the thickness can be 2-3.5mm.

Our raw materials come from government-operated stainless steel factories, and we have test certification for each batch of materials. We only use 304 or 316 to make stainless steel sculptures. However, other businesses use 201 stainless steel for low prices.

Resin sculpture production process

Fiberglass sculpture is a finished type of sculpture. Fiberglass sculpture has the characteristics of light weight, corrosion resistance and relatively low cost. FRP, also known as FRP, is known as fiber reinforced plastic. It is a composite material composed of synthetic resin as matrix material and glass fiber and its products as reinforcement material.

Production Flow

1. Showing the details drawing/ 3D mold for clients to confirm.

2. Making exact structures according to drawing/ client's photos/ 3D mold.

3. Cover the stainless steel plate on existing structures.

4. Welding and polishing the surface.

5. Stand up and take all different views pictures/ videos, show to clients.

6. Packing into iron box after clients are satisfied with sculptures.